HEM MODEL PHM-20/144 PLATE SAW

ACCIÓN #110429         REF #110429

S/N - 552097                         MANUFACTURED IN 1997

SPECIFICATIONS: STOCK # 110429

Blade to column...................: 20”
Maximum work height...............:	20”
Maximum cut length................:	144”
Blade size........................: 1-1/2” x 19’10”
Blade Speed.......................: 70-360 sfpm infinitely variable
Table capacity....................: 12,000 lbs
Motor.............................: 15 HP, 220/440 volt, 3 phase 
(currently wired 440 volt)
AC-speed controlled by a variable frequency controller
Carriage table....................: Electrically driven by a Vector 
drive
Hydraulics........................:	2 HP, 220/440 volt

Standard Equipment

Powered blade brush
Chip removal system
Cut watcher system
Powered guide arm
Depth stop to limit stroke of table
Computer controlled cutting
Work light
Right angle guides: This feature will allow cutting perpendicular to 
the
travel of the table – 25” capacity. This feature will allow a 
perpendicular cut to the standard cut on the same part. The standard 
cut must be made and the arm must be backed out, then the right angle 
guides are installed for the second cut. Head traversing speed is 
determined by the computer exactly as the table traverse speed.

Specifics on:

Chip Conveyor System:
Chip Conveyor System to convey chips from the sawing area to a remote 
chip box for easier removal

Cut Watcher System:
A system that monitors the cut for squareness to a pre-set deviation 
value. The system shuts down the saw when the pre-set value is 
exceeded.

Controls:
Control console mounted at normal operation station to control 
hydraulic and electrical functions and includes: emergency stop, 
power, forward-reverse (with feed ranges for feeding material), and 
power.

MACHINE DIMENSIONS: 20'L, X 8'W, X 8'1/2"H
MACHINE WEIGHT: 19,000 LBS.







PRICE....................: ${please call for price}