14" X 36" CINCINNATI MODEL DE UNIVERSAL GRINDER

STOCK #108888         REF #108888

S/N                                             YEAR-1973

SPECIFICATIONS: STOCK # 108888

Maximum Swing Over Table.......................: 14 15/16"
Nominal Distance Between Centers...............: 36"
Maximum Distance Between Centers...............: 38 1/2"
Distance From Floor To Center..................: 42 3/8"
Swivel Table Graduated To An Angle:
Toward Wheelhead...............................: 11 Degrees
Away From Wheelhead............................: 3 Degrees
Swivel Table Graduated To Taper Per Foot:
Toward Wheelhead...............................: 4 1/2"
Away From Wheelhead............................: 1 1/4"

Grinding Wheelhead:
Swivel Range:
Lower Swivel, Right And Left...................: 90 Degrees
Upper Swivel, Right And Left...................: 30 Degrees
Grinding Wheel Sizes...........................: 14" x 1 1/2" x 5"

Cross Feed:

Automatic Infeed At Table Reversal (Diameter
Reduction......................................: Low .0002" To .005", 
High .005"To .0125"
Pick Feed Selections:
Right End Only, Left End Only..................: Yes
Right And Left Ends............................: Yes
Wheelhead Movement/Turn Of Crossfeed Handwheel.: Low .050", High .250"
Minimum Infeed Increment Diameter Reduction....: .000050"
Headstock And Footstock:
Taper Hole In Headstock And Footstock Spindles.: No. 9 B & S
Number Of Work Rotation Speeds.................: Infinite
Range Of Work Rotation Speeds..................: 50 To 500 RPM,
(Footstock Center Retraction By Hand Lever)
Headstock Spindle Nose, American Lathe Standard: 5"
Headstock Swivel:
Toward Wheellhead..............................: 90 Degrees
Away From Wheelhead............................: 30 Degrees
Table Traverse:
Number Of Table Traverse Speeds................: Infinite
Range Of Table Travese Speeds..................: 3 To 220 IPM
Minimum Movement Required To Reverse Table.....: 3/32"
Accuracy: Table Reversal At All TraverseRates..: .004"
Independent Right Hand And Left Hand Tarry Adj.: 0 To 5 Seconds
Mechanical Hand Table Traverse Per Revolution
Of Handwheel...................................: Rapid 15/16", Slow 
0.2"

Equipped With:

Adjustable Micro Table Stop With Starrett .001 Resolution Indicator
Starrett .001 Resolution Table Taper Indicator
Miscellaneous Parts Including:
(1) Steady Rest,
(1) Dresser
(1) Radius Wheel Dresser
Wrenches
Guards
Centers, Etc.
Foot Pads
Stand Alone Electrical Panel
Motor Information:
Wheelhead Motor...............................: 5 HP, 230/460 Volt, 
1715
RPM-2 Grinding Speeds By Belt Change
Hydraulic Pump Motor..........................: 1 1/2 HP, 230/460 
Volt,1730 RPM
Headstock Motor...............................: 1 1/2 HP, Vari Speed, 
0-2700 RPM
Cutting Fluid Pump Motor......................: 1/6 HP, 208/230/460 
Volt
(Currently Wired For 440 Volts)

This Is A One Owner Machine With Original
Scraping. It Was Used For Prototype Work,
Never Used In Production.
The Last Owner Had A Toolmaker Fashion An
Internal Attachment. It Has Hinged Ears
In Back Of The Spindle Where You Could Swing
Down An Internal Attachment. He Had It Set
Up To Do Internal Grinding With His Own
Fixture. We Only Have The Dumore Spindle,
But A Compentent Toolmaker Could Easily Make
Another Attachment.
This Cincinnati Universal Hydraulic Grinder Has
Expensive Accessories Including The Table
Mounted Universal Grinding Wheel Dresser.
We Believe It Has Original Paint
Copies Of Miscellaneous Books Included
Electrical Print And Foundation Drawing In Panel


Approximate Dimensions: 7' x 12' x 5' 6" H
Approximate Weight: 11,500 Lbs.





PRICE....................: ${please call for price}