OKK MCV-1060 VERTICAL MACHINING CENTER

ACCIÓN #108359         REF #108359

NEW - 1999

SPECIFICATIONS:

TABLE DIMENSIONS..................: 98.43 X 41.73
TABLE T-SLOT......................: 7 X 0.866"
TRAVELS..(X) AXIS.................: 84.25"
         (Y) AXIS.................: 41.73"
         (Z) AXIS.................: 31.5"
SPINDLE NOSE TO TABLE.............: 9.84 - 41.34"
MAX. TABLE LOAD...................: 11,023 LBS.
SPINDLE TAPER.....................: #50  7/24
SPINDLE RANGE (AUTO SELECT).......: 2
SPINDLE SPEED.....................: 25 - 6,000 RPM
SPINDLE DRIVE.....................: 35/30 HP
SPINDLE TORQUE (MAX)..............: 907 FT - LBS.
RAPID TRAVERSE (X/Y)..............: 472 IPM
               (Z)................: 394 IPM
FEED RATE RANGE...................: 394 IPM
AXIS MOTOR (X/Y/Z)................: 6.0 / 6.6 HP
AXIS THRUST (X/Y).................: 7,118 LBS (MAX)
AXIS THRUST (Z)...................: 7,118 LBS (MAX)
ATC MAGAZINE CAPACITY.............:40 TOOLS
TOOL SHANK........................: CAT "V"
TOOL DIAMETER (MAGAZINE FULL).....: 4.33" (MAX)
TOOL DIA. (ADJ. POTS EMPTY).......: 7.87" (MAX)
TOOL LENGTH (FROM GAUGE LINE).....: 13.78" (MAX)
TOOL WEIGHT (MAXIMUM).............: 44.1 LBS
TOOL TO TOOL CHANGE TIME..........: 2.5 SECONDS
CHIP TO CHIP......................: 10 SECONDS
MACHINE DIMENSIONS................: 16.1x19.3x13.1 FT


EQUIPPED WITH:

OKK NEOMATIC 635 CNC CONTROLS
CHIP AUGER
HIGH SPEED MACHINING MODE 1 FOR CONTOURING
ETHERNET INTERFACE
SOFT SCALE 111 ON X,Y,Z AXIS & SPINDLE
HARD DISK 200MB
MANUAL PULSE HANDWHEEL
ALL CAST CONSTRUCTION - DIAGONAL RIBBED COLUMN & BED
AUTOMATIC WAY LUBRICATION ON ALL AXIS' WITH ALARM
COOLANT EQUIPMENT
SYNCHRONOUS TAP CYCLE
HELICAL INTERPOLATION
HIGH SPEED TYPE ATC
INTEGRAL, HARDENED, & GROUND BOX WAYS TYPE
TURCITE COATED
**** RAN ONLY ALUMINUM ***




PRICE....................: ${please call for price}